Battlegroup

By Tom Burgess,

If you know me…you know I have been very excited about what 3D printing and how it is revolutionizing the wargaming hobby.  If not,  you can check out an article I wrote about it .  One of the things I said in that article that would revolutionize the miniature wargaming hobby would be independent miniature designers being able to offer products through venues like  Patreon and Kickstarter. One such independent designer who has been at it for quite a while with a good bit of success is Henry Turner. Henry, based in the UK, has done very will with is 1:600 sailing ship range, his 6/15mm American Civil War and 6/15mm Napoleonic Wars, and now a 10mm/15mm/28mm Modern “1983” Warsaw Pact line.

by Tom Gall

In this article we’re going to focus on infantry for Battlegroup NorthAG by the Plastic Soldier Company. How should we paint and base them?

Painting British

Let’s start out with British infantry, as their camo pattern uniform is a bit more complicated. For the models, I’m using the Plastic Soldier Company 10mm Ultracast, mechanized infantry box.

Starting with a base coat, I primed my British black. Starting with Helmets 888  as the initial coat of Vallejo, followed by a dry brush of 886 Green Grey Vallejo.

By Tom Gall

There are a good number of quality WWII rulesets in existence, let’s explore some of these rules, point out what their strong/weak points are and compare what might draw you to one over the other.

The rulesets considered in this article are : by Battlefront, by Too Fat Lardies, by Warlord, by Plastic Soldier Company.

Each of these rules is generally company level actions with support, for the most part, feature individual models, and focus on the WWII era. All are D6 based. All have extra material that offer campaign experiences, lists, and flavor to feel like you’re been given command with a battle to win. All are either point costed and/or have a list building system which makes it easier to put together a game.

This week, we’ll look at two of the four: FOW and Battlegroup. The other two systems will follow in a later article.

By Tom Gall

PSC’s new line of 10mm figures for Battlegroup: NorthAG is beginning the reach the hands of those who ordered. We’ve looked at in the past so let’s take some time to look at some of the hardware PSC makes for the game and paint it up.

, contains 10 T-64, gobs of infantry (>100), 10 BTR-60s, and 2 BDRM-2s. Everything comes on a sprue, so you’ll need to snip them off, and file a little excess as normal.

At 10mm scale, the first thing I noticed was the material, which isn’t hard plastic, but not exactly a soft plastic either. PSC calls it ultracast. It’s quite pliable, surprisingly so, bending a comparable metal or plastic gun barrel, you’d be looking at some amount of damage. This material impressively takes it no problem.

By Tom Gall

This is the 3rd in our series of articles on Battlegroup: NORTHAG a set of Cold War gone hot rules set in 1983 published by the and written by Warwick Kinrade. In the prior two articles, and then . In this one, we’re going to play a game and see how it goes.

By Tom Gall and NDNG Dane

The (PSC) will be releasing shortly* a much anticipated new set of rules covering World War III, while a “what if”, a conventional war has touched off and the forces of NATO and WARPAC are enjoined in battle across Europe, each in a desperate struggle to take/give ground before presumably, the nukes might fly.

Titled Battlegroup: NORTHAG, the book focuses on the Northern Army Group section of the front, thus NORTHAG. The setting is 1983 which Warwick Kinrade choose as it was a time of heightened tensions between the powers and was the dividing line before the introduction of a wide range of new equipment.

In this series of articles, we’ll be looking at the rules, the British and Soviet army lists that are included with the new book and finish up with a couple of BatReps.

By Tom “Chairborne” Mullane

I conducted some of my first large scale terrain experiments earlier last year while building a series of terrain display boards for my 15mm FOW armies.  The basic elements I used were pretty effective and I had plans to make some more this winter and spring.

For our MW Eastern Front escalation league, the Huntsville Historical Gamers were given the opportunity to review a nice addition to our table terrain.  This Iconic terrain piece is produced in 15mm by the Epsilon Studios from Barcelona, Spain

Introducing the Stalingrad – Barmaley Fountain. This historical fountain is based on a Russian fairy tale, Aybolit and Barmaley, written in 1925 by Korney Chukovsky.  In the poem, Doctor Aybolit cautions the Little children:  Do not go to Africa for there are large evil barmaley there that will bite you!  In the whimsical statue, by sculptor Romuald Lodko, the children are dancing around the barmaley.

by Tom Burgess

Models provided by the

I was very fortunate to have the opportunity to build and review a box of the Plastic Soldier Company’s 15mm Sextons.  I have an all plastic Irish Guards Tank Battalion but had no fire support to go with this force. So this project would be a perfect fit.

This would be the third set of 15mm armoured vehicle models made by the that I have built.

Before these, I had built Soviet T-70s and German PzKw-IVHs. Both sets were very good and I was very excited to get started on these.

Plastic Soldier’s Company’s timing was great. I recently had the opportunity to host an intro-101 style training session at Gamex, a gaming convention in Los Angeles, California. What should show up in my mailbox a week before I had to submit event details to the convention? Battlegroup: Torch, their latest theatre book.

What follows in this piece is a combination of a look at the book itself, as well as lessons learned from applying it in a training session with players I didn’t know.